Skip to content
FLOWSERVE · Compressor

Compressor Seals and Systems

Dry gas, carbon ring and oil-lubricated seals and seal gas support systems for compressors and turbomachinery.

FLOWSERVE Circpac carbon ring sealFLOWSERVE Drypac systemFLOWSERVE N2 Genpac system
Product familySeals and support systems
Products

Compressor seals and support systems

Choose the model that suits your application and write to us for technical information and documents.

  • FLOWSERVE Gaspac sectional diagram
    Dry gas seal

    Gaspac

    Low breakaway torque and reliable performance under all operating conditions thanks to non-contacting lift-off technology; standard modular design in various configurations.

    • Non-contacting
    • Modular
  • FLOWSERVE Circpac
    Carbon ring seal

    Circpac

    Segmented carbon ring seals used in turbomachinery; they keep bearing oil away from the dry gas seal and can also be used as a stand-alone solution.

    • Turbomachinery
  • FLOWSERVE Turbopac diagram
    Oil-lubricated seal

    Turbopac

    Single mechanical seal combined with an atmospheric floating ring or labyrinth seal, or face-to-face dual mechanical seal arrangements.

    • Single / dual arrangement
  • FLOWSERVE Ampliflow G-Boost
    Gas booster

    Ampliflow G-Boost

    Supplies compressor gas seals with a continuous flow of clean seal gas; driven by an electric motor, it increases reliability during periods of low differential pressure.

    • Electrically driven
  • FLOWSERVE Ampliflow
    Gas supply

    Ampliflow

    Helps ensure an adequate supply of clean, filtered gas to the seals during periods of low differential pressure across the compressor.

    • Clean gas supply
  • FLOWSERVE Supplypac
    Support system

    Supplypac

    Modular dry gas seal support system that simplifies the typical dry gas seal control panel.

    • Modular panel
  • FLOWSERVE Cleanpac filter
    Filter series

    Cleanpac

    Filter series comprising heavy liquid removal units, hybrid coalescing / pre-filter units and dual coalescing filter assemblies.

    • Filtration
  • FLOWSERVE Drypac
    Gas drying

    Drypac

    Lowers the dew point of the gas and raises the supply gas temperature to at least 20 °C above the dew point, as recommended by API, reducing liquid formation on the seal faces.

    • API recommendation
    • +20 °C margin
  • FLOWSERVE N2 Genpac
    Nitrogen generation

    N2 Genpac

    Separates nitrogen from air using micron fibre filtration technology to produce N2 of up to 99% purity for seal and separation gas supply.

    • Up to 99% purity
FLOWSERVE

Other product groups

FLOWSERVE page
Quotes and support

Request a quote for FLOWSERVE compressor seals

Share your compressor type, gas, pressure and speed, and let’s define the right seal and support system together.